Fuji Electric ALPHA5 Smart, User Manual

Page: 24 / 636

CHAPTER 0 INTRODUCTION
0-4
Safety Precautions
0 ■
Precautions on storage
CAUTION

Do not store at places susceptible to rain or water splashes or toxic gases or liquid.
It might cause failure.

Store at places without direct sunshine within the predetermined temperature and humidity range
(between -20°C and +60°C, between 10% and 90% RH, without condensation).
It might cause failure.

To store in the installed state.
Cover the entire servomotor with a sheet to protect against vapor, oil and water. Apply an
anticorrosive agent on machined surfaces such as the shaft and flange face.
To avoid rust on bearings, turn manually or operate for five minutes without a load about once a
month.
■
Precautions on transportation
CAUTION

Do not hold cables or motor shaft when transporting.
It might cause failure and injuries.

Overloaded products will cause collapse of cargo, hence observe the requirements.

The eye bolt of the servomotor shall be applied exclusively for transportation of the servomotor. Do
not use it to transport machineries.
It might cause failure and injuries.

For detailed description regarding lithium batteries, refer to "CHAPTER 15. APPENDIXES."

Fumigation process before shipment
The internal parts of servo amplifiers may get corroded due to a halogen compound gas such as
methyl bromide which is used for fumigation process in packaging, resulting in damage of the
product.
When shipping servo amplifiers by installing them to a board or unit, pack them using wooden
materials which have been processed with fumigation treatment.