Fuji Electric ALPHA5 Smart, User Manual

Page: 550 / 636

CHAPTER 14 PC LOADER
14-6
Communications Setting
14
14.3 Communications Setting
Two methods are available to connect the servo amplifier to a PC.
The communications setting detail varies depending on the connection method. See the following
description and set the communications appropriately.
1) When using the RS-232C/485 converter (NW0H-CNV)
 Wiring outline
 Setting method
(1) Select "Comm. Setup" from
Wizard Menu.
(2) Select "It communicates directly with the
amplifier(COM)." in the Connection method
item, and then click the OK button.

Notes
Set the same value between PA2_73 (communications baud rate) on the amplifier side and the
communications baud rate as a communications condition.
No. Parameter name Setting range Default value Change
PA2_73 Communications
baud rate
0
･･･
38400 [bps]
、
1
･･･
19200 [bps]
2 ･･･ 9600 [bps] 、 3 ･･･ 115200 [bps]
0 Power
PC Loader
RS-232C/485 converter
(NW0H-CNV)
CAT5 cable
(commercial item)
USB/serial cable
(commercial item)