Fuji Electric ALPHA5 Smart, User Manual

Page: 137 / 636

CHAPTER 2 WIRING
Description of I/O Signals
2-89
2
CONT Through: Sequence Output Signal (Setting value 91 to 95)
This function allows communications input signals to be output via OUT signals of the hardware.

Function
The signals set to CONT 20 to 24 can be output through OUT signals 1 to 3 of the hardware. When
a CONT
□
signal is allocated to an OUT signal, the ON/OFF status of the CONT signal is output
as a through signal to the OUT signal regardless of the function allocation of the corresponding
CONT signal.
CONT signals respectively correspond to CONT a to e
Corresponding CONT signals
CONTa CONT20
CONTb CONT21
CONTc CONT22
CONTd CONT23
CONTe CONT24
 Parameter setting
Set the values (91 to 95) corresponds to the parameter of output terminal function setting. The
setting values to the relevant signals are as follows.
PA3_51 to 53
No. Name Setting range Change
51 OUT1 signal assignment
52 OUT2 signal assignment
53 OUT3 signal assignment
0 to 95 91 : CONTa through
92 : CONTb through
93 : CONTc through
94 : CONTd through
95 : CONTe through
Power