![background image](http://html1.mh-extra.com/html/ducati/2006-monster-s2r-1000/2006-monster-s2r-1000_workshop-manual_2537598403.webp)
A
B
C
D
E
F
G
H
L
M
N
P
Motore
Engine
sezione / section
N 7.1
97
Monster S2R 1000
- M.Y. 2006 - edizione/edition 00
Rimontaggio leveraggio
selezione marce
Posizionare nel semicarter lato catena
il leveraggio di selezione marce (25)
completo di alberino di comando,
molla e piastrina.
Posizionare la forcella comando
tamburo del cambio centrato
rispetto ai rullini del tamburo.
Montare provvisoriamente la leva
del cambio (o una leva di servizio) e
il pignone motore e mettere il
cambio in seconda marcia.
Installare il piastrino
88713.1091
nei
perni dell'albero comando forcelle
(come mostrato in figura).
Allineare la tacca, corrispondente alla
mezzeria dell'arpione di spostamento
albero comando forcelle, con
l'estremità del piastrino.
Su questa posizione serrare le viti (18)
e (20) di fissaggio del leveraggio di
selezione marce (Sez. C 3).
Con cambio in posizione di riposo
verificare che la corsa della leva in
fase di innesto e in scalata risulti
uguale. Analoga situazione deve
verificarsi anche con marcia inserita.
Agendo sulla leva comando cambio e
contemporaneamente ruotando il
pignone provare l'inserimento di tutte
le marce in fase di innesto e in scalata.
Rimuovere leva e pignone installati
in precedenza.
Operazioni
Rif. Sez.
Installare il coperchio
frizione completo di
campana ed ingranaggio
della primaria
N 6.2
Installare il gruppo
volano/alternatore e il
coperchio alternatore
N 8
Reinstalling the gear
selector lever
Position the gear selector lever (25)
with control shaft, spring, and plate,
into the chain-side casing.
Position the gearbox drum selector
fork in the centre of the drum rollers.
Temporarily fit the gearbox lever
(or a service lever) and the engine
sprocket, and shift to second gear.
Fit plate part no.
88713.1091
in the
fork shaft pins (see figure).
Align the notch that marks the
centreline of the fork shaft pawl,
with the end of the plate.
Then tighten gear selector lever
retaining screws (18) and (20) to
the specified torque (Sect. C 3).
With the gearbox in neutral, check
that the stroke of the lever is the
same when shifting up and down.
The same should apply when a gear
is engaged.
Operate the gearbox lever and turn
the sprocket at the same time to
check that all the gears engage
when shifting up and down.
Remove the previously installed lever
and sprocket
Operation
See Sect.
Refit the clutch cover
complete with clutch
housing and primary
drive gear
N 6.2
Refit the flywheel /
generator assembly
and generator cover
N 8
25
88713.1091
18
20
Summary of Contents for 2006 Monster S2R 1000
