![background image](http://html1.mh-extra.com/html/ducati/2006-monster-s2r-1000/2006-monster-s2r-1000_workshop-manual_2537598198.webp)
A
B
C
D
E
F
G
H
L
M
N
P
Ruote - Sospensioni - Freni
Wheels - Suspensions - Brakes
sezione / section
G 5
34
Monster S2R 1000
- M.Y. 2006 - edizione/edition 00
Controllo perno
forcellone
Verificare l’entità della distorsione
del perno (19) forcellone con un
comparatore:
posizionare il perno (19) su due
riscontri uguali;
ruotare il perno e muovere in senso
orizzontale lo strumento;
leggere il valore della distorsione.
Limite di servizio: (
0,3
mm)
(Sez. C 1.1).
Sostituire i perni che risultano
distorti oltre il limite prescritto o
che presentano incrinature e/o
deformazioni.
Verifica gioco assiale
forcellone
La scelta dei rasamenti (12) è
necessaria in fase di rimontaggio
del forcellone.
Per verificare il gioco assiale
operare come segue:
introdurre un rasamento (12) di
spessore
1,8
mm su entrambi i lati
del motore; tenere appoggiato il ramo
sinistro del forcellone (4) al motore e
verificare con spessimetro o con
rasamenti calibrati il gioco presente
sull’altro lato del motore.
È consentito un gioco laterale fino a
0,10
mm.
Se la lama o il rasamento di spessore
0,10
mm fatica ad entrare non è
necessario introdurre alcun rasamento.
In caso contrario sono disponibili
rasamenti da
0,20
mm e da
0,10
mm
con i quali ristabilire il gioco prescritto.
Esempio:
Importante
Il pacco di rasamenti di
spessore maggiore va sempre
montato sul lato destro del forcellone.
Gioco
rilevato
Rasamenti
lato sinistro
Rasamenti
lato destro
0,10
-
n°1 da
0,10 mm
0,20
n°1 da
0,10 mm
n°1 da
0,10 mm
0,30
n°1 da
0,10 mm
n°1 da
0,20 mm
Inspecting the swingarm
pivot shaft
Measure the swingarm pivot shaft (19)
runout using a dial gauge:
place the pivot shaft (19) on two
reference blocks of the same size;
rotate the shaft and move the
gauge horizontally;
read off the runout.
Service limit: (
0.3
mm) (Sect. C 1.1)
Renew the pivot shaft when runout
exceeds the specified limit or if
cracked or otherwise damaged.
Checking swingarm
endfloat
The shim thicknesses (12) are to be
determined on refitting the swingarm.
Check the endfloat as follows:
install shims (12) of thickness
1.8
mm
on both sides of the engine; hold the
left branch of the swingarm (4) up
against the engine and measure the
clearance on the other side of the
engine using feeler gauges or
calibrated shims.
The maximum permissible endfloat is
0.10
mm.
When a
0.10
mm feeler gauge or
shim can only be inserted with
difficulty, there is no need to install
any further shims. Otherwise, use
the available shims in two sizes
(
0.20
mm and
0.10
mm) to obtain
the specified endfloat.
Example:
Important
The thicker of the two shim
packs must always be installed on
the right-hand side of the swingarm.
Measured
clearance
Shims on
left-hand
side
Shims on
right-hand
side
0,10
-
one
0.10 mm
0,20
one
0.10 mm
one
0.10 mm
0,30
one
0.10 mm
one
0.20 mm
19
19
12
4
Summary of Contents for 2006 Monster S2R 1000
