![background image](http://html1.mh-extra.com/html/ducati/2006-monster-s2r-1000/2006-monster-s2r-1000_workshop-manual_2537598125.webp)
A
B
C
D
E
F
G
H
L
M
N
P
Uso e manutenzione
Use and Maintenance
sezione / section
D 5
61
Monster S2R 1000
- M.Y. 2006 - edizione/edition 00
Controllo corrente
impianto di ricarica
Note
I simboli delle icone utilizzate
nella procedura sono riportati in una
tabella alla fine della presente sezione.
È possibile verificare in quali condizioni
di funzionamento del motore
l’alternatore eroga una corrente
sufficiente per ricaricare la batteria e
per alimentare il sistema di iniezione/
accensione e tutti gli utilizzatori elettrici
presenti sul motociclo. La pinza
amperometrica (18) rileva il campo
magnetico generato dalla corrente che
passa nel cavo su cui è applicata.
Sollevare il serbatoio (Sez. L 2).
Accendere lo strumento DDS (1)
facendo riferimento al paragrafo
“Alimentazione dello strumento”.
Collegare il cavo alimentazione e
diagnosi (Modulo Misure) (3) al
connettore modulo misure (D)
dello strumento DDS (1).
Collegare la pinza amperometrica
alla presa (E) del cavo alimentazione
e diagnosi (Modulo Misure) (3).
Attenzione
La pinza amperometrica non
deve essere connessa su cavi in
cui scorre la corretnte elettrica.
Inserire poi la pinza amperometrica sul
cavo positivo della batteria facendo
attenzione che la freccia di riferimento,
stampigliata sulla pinza, sia rivolta
verso il polo positivo (
+
) della batteria.
Testing the battery
charging system
Notes
The on-screen icons used
during this procedure are explained
in a table at the end of this section.
You can determine the engine rpm
required for the alternator to produce
sufficient current to charge battery,
power the injection/ignition system
and all the electrical equipment on the
motorcycle. When applied to a cable,
the ammeter clamp (18) detects
the magnetic field generated by the
current passing through that cable.
Lift the fuel tank (Sect. L 2).
Switch on the DDS tester (1); see
heading “Tester Power Supply”.
Connect the power and diagnostics
cable (Measurement Module) (3)
to the measurement module
connector (D) on the DDS tester (1).
Connect the ammeter clamp to the
connector (E) of the power and
diagnostics cable (Measurement
Module) (3).
Warning
The ammeter clamp must
not be connected to wires through
which electrical current is flowing.
Apply the ammeter clamp to the
battery positive terminal lead with the
arrow on the clamp pointing towards
the battery positive terminal (
+
).
D
1
3
E
3
15
18
Summary of Contents for 2006 Monster S2R 1000
