![background image](http://html1.mh-extra.com/html/ducati/2006-monster-s2r-1000/2006-monster-s2r-1000_workshop-manual_2537598524.webp)
A
B
C
D
E
F
G
H
L
M
N
P
Impianto elettrico
Electric system
sezione / section
P 8
64
Monster S2R 1000
- M.Y. 2006 - edizione/edition 00
Smontaggio immobilizer
Portare l’interruttore a chiave in
posizione
OFF
.
Scollegare dalla parte inferiore
del blocco chiave il connettore
antenna (5) Immobilizer ed il
connettore blocco chiave (4).
Note
I riferimenti (4) e (5) sono gli
stessi indicati nelle tavole riportate al
capitolo “Disposizione dei cablaggi
sul motociclo” della Sezione P 1.
Rimuovere le fascette di fissaggio
cablaggio antenna Immobilizer.
Svitare i due dadi (1) di fissaggio
protezione antenna Immobilizer.
Rimuovere il coperchio (2) e
sfilare l’antenna Immobilizer (3)
dall’interruttore a chiave.
Rimuovere le viti speciali (6).
Rimuovere dal telaio l'interruttore a
chiave (9) completo di piastrino (8).
Smontare il piastrino (8)
dall'interruttore a chiave (9).
Rimontaggio immobilizer
Inserire il cavo dell'antenna
immobilizer (3) nel piastrino (8).
Montare il piastrino sull'interruttore a
chiave (9), facendo passare il cavo
dell'antenna nell'apposita cava (A)
del piastrino stesso.
Applicare frenafiletti sulle due viti
speciali (6).
Montare l'interruttore a chiave (con
piastrino e antenna) sul telaio (7),
impuntando le due viti speciali (6).
Portare le viti a battuta e serrarle
alla coppia prescritta (Sez. C 3).
Applicare una goccia di Loctite
all'interno del coperchio (2) nei punti
indicati in figura.
Installare con cura l'antenna (3)
all'interno del coperchio (2),
bloccandola con i due dentini (C)
del coperchio stesso.
Montare il coperchio sull'interruttore
a chiave, accompagnando il cavo
dell'antenna verso il basso.
Bloccare il coperchio impuntando i
due dadi ciechi (1).
Serrare i dadi alla coppia prescritta
(Sez. C 3).
Removing the immobilizer
Set the ignition switch to
OFF
.
Disconnect the immobilizer antenna
connector (5) and the key lock
connector (4) from the base of
the lock.
Notes
References (4) and (5) are
the same as shown in the diagrams
under the heading “Routing of
wiring on frame” in Section P 1.
Remove the ties securing the
Immobilizer antenna wiring.
Undo the two nuts (1) securing the
Immobilizer antenna cover.
Withdraw the cover (2) with the
antenna (3) from the ignition switch;
Remove the special screws (6).
Remove ignition switch (9) complete
with plate (8) from the frame.
Remove plate (8) from ignition
switch (9).
Refitting the immobilizer
Insert immobilizer antenna cable (3)
into plate (8).
Fit the plate on ignition switch (9),
routing the antenna cable through the
respective groove (A) in the plate.
Apply recommended threadlocker to
the two special screws (6).
Install the ignition switch (with plate
and antenna) to frame (7) and start
the two special screws (6).
Tighten the screws fully to the
specified torque (Sect. C 3).
Apply a drop of Loctite inside cover (2)
at the points indicated in the figure.
Carefully install the antenna (3) inside
the cover (2) and secure it with the
two lugs (C) on the cover itself.
Fit the cover to the ignition switch,
leading the antenna cable downwards.
Secure the cover with the two cap
nuts (1).
Tighten the nuts to the specified
torque (Sect. C 3).
4
5
2
LOCK
1
2
6
3
9
7
A
8
6
LOCK
11
A
C
Summary of Contents for 2006 Monster S2R 1000
