Ducati 2006 Monster S2R 1000, Workshop Manual, Page: 39 / 540

Caratteristiche tecniche
Technical specification
sezione / section
C 1.1
11
A
B
C
D
E
F
G
H
L
M
N
P
Monster S2R 1000
- M.Y. 2006 - edizione/edition 00
Cylinder/Piston
Gearbox
Cooling system
Front wheel
Reference Standard value Service limit
Cylinder Max. bore ovality 0.03 mm
Max. bore taper 0.03 mm
Nominal diameter
Size group A
Size group B
Size group C
ø
94
94.000 mm / 0 to 0.01 mm
94.010 mm / 0 to 0.01 mm
94.020 mm / 0 to 0.01 mm
Piston Nominal diameter
Size group A
Size group B
Size group C
ø
94
93.965 mm / 0 to 0.01 mm
93.975 mm / 0 to 0.01 mm
93.985 mm / 0 to 0.01 mm
Piston outside diameter measured at
6.0 mm from piston base
Connecting rod Connecting rod big-end bore diameter
Section A
Section B
ø
45
ø
45 to 0.025 mm / to 0.019 mm
ø
45 to 0.019 mm / to 0.013 mm
Gudgeon pin–to-piston
clearance 0.015 to 0.024 mm.
Piston-to-cylinder bore
clearance 0.025 to 0.045 mm.
Gudgeon pin-to-
connecting rod
clearance 0.035 to 0.049 mm.
Big-end bearing-to-
crankpin clearance 0.025 to 0.059 mm.
Engine cylinders and
compression measured
with DDS tester 11 to 12 bar
10 bar (min), difference
between the two
cylinders: 2 bar (max.)
Reference Standard value Service limit
Gearbox shafts Endfloat 0.05 to 0.20 mm.
Selector drum Endfloat 0.10 to 0.40 mm.
Gear selector fork Selector fork end thickness 3.90 to 4.00 mm.
Selector fork-to-gear clearance 0.070 to 0.285 mm. 0.4 mm
Reference Technical specifications
Type Air-cooled: heat dispersion through the extensive
finning on the two cylinder/head assemblies
Reference Standard value Service limit
Minimum tread depth In the most worn part 2 mm
Tyre pressure (Cold) 2.1 bar – 2.3 kg/cm
2
Axle runout On 100 mm 0.2 mm
Wheel rim runout Radial 0.8 mm 2 mm
Axial 0.5 mm 2 mm