![background image](http://html1.mh-extra.com/html/ducati/2006-monster-s2r-1000/2006-monster-s2r-1000_workshop-manual_2537598177.webp)
A
B
C
D
E
F
G
H
L
M
N
P
Ruote - Sospensioni - Freni
Wheels - Suspensions - Brakes
sezione / section
G 2
13
Monster S2R 1000
- M.Y. 2006 - edizione/edition 00
Remove the circlip (29).
Important
Take care not to damage the
outer tube (26) or inner tube (21).
To separate the outer tube (26) from
the inner tube (21), pull the inner tube
sharply outwards repeatedly to
gradually displace the bottom bush (25).
Insert a screwdriver in the slit in the top
bush (27) and open it up sufficiently to
slide the bush off the inner tube.
Remove the following parts from the
inner tube (21):
- bottom bush (25)
- ring (24)
- oil seal (23)
- circlip (29)
- dust seal (22)
Inspection of the adjustable
front fork
Place the spring on a flat surface and
measure the free length (L).
Service limit:
270
mm
Renew the spring if the length is not
within the specified limit.
Inspect the outer surface of both fork
inner tubes and the internal surfaces
of both outer tubes. They must be
free from scoring, steps, or dents.
Check that outer tubes are straight:
maximum permissible straightness
error
0.10
mm.
Whenever the inner tube is removed
from the outer tube it is good practice
to renew the bushes (25) and (27).
Rimuovere l’anello di fermo (29).
Importante
Fare attenzione a non rovinare il
fodero esterno (26) e lo scorrevole (21).
Estrarre il fodero esterno (26) dallo
scorrevole (21), assestando colpi in
rapida successione, per contrastare la
resistenza della boccola di guida (25).
Rimuovere la boccola (27) dallo
scorrevole inserendo la punta di
un cacciavite nell’apertura della
boccola stessa.
Rimuovere dallo scorrevole (21):
- la boccola (25)
- l’anello (24)
- l’anello di tenuta (23)
- l’anello di fermo (29)
- il raschiapolvere (22).
Ispezione forcella anteriore
regolabile
Appoggiare su un piano la molla e
misurarne la lunghezza libera (L).
Limite di servizio:
270
mm
Sostituire la molla se la lunghezza
non rientra nel limite.
Esaminare la superficie esterna dei
due scorrevoli e quella interna dei
due foderi; non dovranno apparire
rigature, scalini o punti di forzatura.
Verificare la rettilineità dei tubi portanti:
massimo errore ammesso
0,10
mm.
Ogni volta che si rimuove il tubo
scorrevole dal fodero è buona norma
sostituire le boccole di guida (25) e (27).
21
26
27
25
24
23
22
21
29
Summary of Contents for 2006 Monster S2R 1000
