![background image](http://html1.mh-extra.com/html/ducati/2006-monster-s2r-1000/2006-monster-s2r-1000_workshop-manual_2537598083.webp)
A
B
C
D
E
F
G
H
L
M
N
P
Uso e manutenzione
Use and Maintenance operations
sezione / section
D 4
19
Monster S2R 1000
- M.Y. 2006 - edizione/edition 00
Svuotamento circuito
impianto frenante
Attenzione
Il liquido impiegato nell’impianto
frenante, oltre a danneggiare la
vernice, è dannosissimo a contatto
degli occhi o della pelle; lavare quindi
abbondantemente con acqua
corrente la parte interessata in caso
di accidentale contatto.
Togliere il coperchio (1) con
membrana dal serbatoio liquido freno
anteriore (A) e il coperchio (2) dal
serbatoio freno posteriore (B).
Collegare alla valvola di spurgo (3)
della pinza anteriore o alla valvola di
spurgo (4) della pinza posteriore uno
spurgatore per freni, comunemente
reperibile in commercio.
Note
Quando si usa un attrezzo per
lo spurgo del freno reperibile in
commercio, seguire le istruzioni
d’uso del fabbricante.
Allentare la valvola di spurgo e pompare
con lo spurgatore fino a quando non
esce più fluido dall’impianto.
In caso di indisponibilità dello
spurgatore, collegare alla valvola
di spurgo (3) della pinza anteriore o
alla valvola di spurgo (4) della pinza
posteriore, un tubicino in plastica
trasparente e immergerne
l’estremità in un contenitore
appoggiato sul pavimento e
contenente liquido freni usurato.
Svitare di 1/4 di giro la valvola di
spurgo.
Azionare la leva o il pedale comando
freno fino alla totale fuoriuscita del
liquido.
Eseguire l’operazione per ogni pinza
freno.
Draining the brake circuit
Warning
Brake fluid will damage painted
surfaces if spilled on them. It is also
very harmful if it comes into contact
with the skin or with the eyes; in
the event of accidental contact, wash
the affected area with abundant
running water.
Remove the cover (1) and
membrane from the front brake fluid
reservoir (A) and the cover (2) from
the rear brake fluid reservoir (B).
Connect a commercial brake
bleeding tool to the front brake caliper
bleed valve (3) or the rear brake
caliper bleed valve (4).
Notes
Follow the manufacturer's
instructions when using a
commercial brake bleeding tool.
Loosen off the bleed valve and
pump with the bleeding tool until no
more fluid emerges.
If you do not have a brake bleeder
available, attach a length of
transparent plastic tubing to the
front caliper bleed valve (3) or the
rear caliper bleed valve (4) and
immerse the other end of the
tubing in a container on the floor
containing old brake fluid.
Unscrew the bleed valve by a 1/4 turn.
Operate the brake lever (or pedal)
until all the fluid has drained out of
the circuit.
Repeat this operation for each brake
caliper.
1
A
2
B
3
4
Summary of Contents for 2006 Monster S2R 1000
