background image

®™ AND THE BRP LOGO ARE TRADEMARKS OF BOMBARDIER RECREATIONAL PRODUCTS INC. OR ITS AFFILIATES.

©2015 BOMBARDIER RECREATIONAL PRODUCTS INC. ALL RIGHTS RESERVED. PRINTED IN CANADA.

 

 

   219 001 648

OPERATOR’S GUIDE, SPYDER F3 / ENGLISH

GUIDE DU CONDUCTEUR, SPYDER F3 / ANGLAIS

FAIT AU / MADE IN CANADA 

U/M:P.C.

Original Instructions

Learn how the Spyder roadster is different.

Read

 this operator’s guide and watch the safety DVD.

Complete

 a training course (if available), practice and become proficient with the controls.  

Consult 

local laws - license requirements vary by location.

Keep 

this Operator’s guide in the vehicle.

The Spyder roadster is a different type of vehicle-

it requires special skills and knowledge.

Learn how the Spyder roadster is different.

Read

 this operator’s guide and watch the safety DVD.

Complete

 a training course (if available), 

practice, 

become proficient with the controls, and get a proper 

license.

Refer

 to the Safety Card before riding.

Always wear a helmet and riding gear.

With this type of vehicle, riders are exposed to more 

road risks than in a car. Even skilled operators can be 

struck by other vehicles or lose control. This vehicle 

wil not protect you in a crash.

Handling limits and road Conditions.

The Vehicle Stability System (VSS) cannot stop you 

from losing control, flipping over, or falling off if you 

exceed this vehicle’s limits. Know the limits for 

different road conditions. Do not ride on ice, snow, or 

off road. Avoid puddles and running water. This type 

of vehicle can hydroplane on water and slip on gravel, 

dirt and sand covered roads. If you must go through 

these road conditions, slow down.

2 1 9   0 0 1   6 4 8

OPERATOR’S

GUIDE

2016

ROADSTER

Includes Safety, Vehicle

and Maintenance Information

SPYDER

®

 F3

TM

SPYDER F3

2016

Summary of Contents for SPYDER F3TM 2016












































































































































































Reviews: