Need Help?
Visit our website at
www.razor.com
or call toll-free at
866-467-2967
Monday - Friday 8:00am - 5:00pm Pacific Time.
1
WARNING
Step 1
Step 2
Required Tools: (Not included)
A. 3 mm Allen wrench
B. Flat screwdriver
CAUTION:
To avoid potential shock or other injury, turn power switch OFF and disconnect
charger before conducting any assembly or maintenance procedures. Failure to follow these
steps in the correct order may cause irreparable damage.
Using a 3 mm Allen wrench, loosen the set screw from
the throttle. Slide throttle away from the grip.
Insert a flat screwdriver between the handle and grip.
Apply a few drops of WD40
®
or soapy water to help
remove the grip, do the same for the other side.
POWER A5
HANDLEBAR GRIPS
REPLACEMENT PROCEDURES
PART # W13113202025