Dell N1100-ON, Reference Manual

Page: 2138 / 2332

Switch Management Commands
2138
logging
Use the logging command in Global Configuration mode to log messages to a
SYSLOG server. To delete the SYSLOG server with the specified address
from the list of SYSLOG servers, use the no form of this command.
Syntax
logging {ip-address | ipv6-address | hostname} [tls {anon | x509 | x509
certificate index}]
no logging {ip-address | ipv6-address |hostname}
• ip-address — IP address of the host to be used as a syslog server.
• ipv6-address — IPv6 address of the host to be used as a syslog server.
• hostname — Hostname of the host to be used as a syslog server. (Range:
1-63 characters) The command allows spaces in the host name when
specified in double quotes. For example, #snmp-server v3-host “host
name”.
• anon—Use anonymous authentication (that is, anonymous mode with
no authentication).
• x509—Use mutual authentication (both client and server side). An
optional certificate index can be used to identify a specific server and
client certificate pair.
Default Configuration
When enabling x509 authentication, a default (non-indexed) certificate pair
is used if present and no certificate index has been specified.
The default SYSLOG server port number is 514. When DTLS is configured
(logging protocol 1), the default port number is 6514.
Command Mode
Global Configuration mode
User Guidelines
A signed X509 certificate must be present on the switch in order for DTLS
(logging protocol 1) to operate. See the crypto commands for further
information on certificates.