Dell N1100-ON, Reference Manual

Page: 975 / 2332

Security Commands
975
console(config-if)# exit
console(config)# radius-server host 1.1.1.1
console(config-auth-radius)#primary
console(config-auth-radius)#exit
console(config)# radius-server host 2.2.2.2
console(config-auth-radius)#exit
console(config)# radius-server host 3.3.3.3
console(config-auth-radius)#key “That’s your secret.”
console(config-auth-radius)#exit
console(config)# radius-server key “Keep it. Keep it.”
console(config)# aaa server radius dynamic-author
console(config-radius-da)# client 3.3.3.3 server-key 0 “That’s your secret.”
console(config-radius-da)# client 1.1.1.1
console(config-radius-da)# client 2.2.2.2
console(config-radius-da)# server-key 0 “Keep it. Keep it.”
console(config-radius-da)# port 3799
console(config-radius-da)# auth-type any
console(config-radius-da)# exit
console(config)#dot1x system-auth-control
console(config)#dot1x initialize
show dot1x
Use the show dot1x command to display:
• A summary of the global dot1x configuration.
• Summary information of the dot1x configuration for a specified port or all
ports.
• Detailed dot1x configuration for a specified port
• Dot1x statistics for a specified port, depending on the tokens used.
Syntax
show dot1x [interface interface-id [statistics]]
• interface-id—Any valid interface. See Interface Naming Conventions for
interface representation.
Default Configuration
This command has no default configuration.