Dell N1100-ON, Reference Manual

Page: 302 / 2332

Layer 2 Switching Commands
302
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
Use the show mac address-table multicast to display multicast MAC address
entries along with forbidden multicast MAC entries.
Example
In this example, all classes of entries in the mac address-table are displayed.
console#show mac address-table
Aging time is 300 Sec
Vlan Mac Address Type Port
---- ---------------- ---------- -----------
0 001E.C9AA.AE19 Management CPU Interface
1 001E.C9AA.AC19 Dynamic Gi1/0/21
1 001E.C9AA.AE1B Management Vl1
10 001E.C9AA.AE1B Management Vl10
90 001E.C9AA.AE1B Management Vl90
Total MAC Addresses in use: 5
show mac address-table address
Use the show mac address-table address command in User Exec or Privileged
Exec mode to display all entries in the bridge-forwarding database for the
specified MAC address.
Syntax
show mac address-table address mac-address [ interface interface-id] [ vlan
vlan-id]
•
mac-address
—
A MAC address with the format xxxx.xxxx.xxxx.
•
interface-id
—
Display information for a specific interface. Valid interfaces
include Ethernet ports and port channels.
•
vlan-id
—
Display entries for the specific VLAN only. The range is 1 to 4093.