Dell N1100-ON, Reference Manual

Page: 1868 / 2332

Switch Management Commands
1868
boot system
Use the boot system command to specify the system image that the device
loads at startup.
Syntax
boot system [unit-id][active|backup]
• unit-id —Unit to be used for this operation. If absent, command
executes on this node.
• active —Boot from the currently active image.
• backup —Boot from the backup image.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
Use the show bootvar command to find out which image is the active image.
Example
console#boot system ?
<unit> Unit to be used for this operation. If absent,
command executes on this node.
active Marks the given image as active for subsequent
re-boots.
backup Marks the given image as active for subsequent
re-boots.
console#show version
Machine Description............... Dell Networking Switch
System Model ID................... N4032
Machine Type...................... Dell Networking N4032
filedescr