Dell N1100-ON, Reference Manual

Page: 1686 / 2332

Layer 3 Routing Commands
1686
Syntax
show ip ospf area area-id [ vrf vrf-name]
• area-id —Identifies the OSPF area whose ranges are being displayed.
(Range: 0–4294967295)
• vrf-name—The name of the VRF instance on which the command
operates. If no VRF parameter is given, information for the default
(global) router instance is shown.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The VRF identified in the parameter must have been previously created or an
error is returned.
The VRF parameter is only available on the N3000/N3100/N4000 series
switches.
Example #1
The following example displays OSPF router information.
console#show ip ospf area 10
AreaID......................................... 0.0.0.10
External Routing............................... Import External LSAs
Spf Runs....................................... 0
Area Border Router Count....................... 0
Area LSA Count................................. 0
Area LSA Checksum.............................. 0
Import Summary LSAs............................ Enable
Example #2
console#show ip ospf area 20
AreaID......................................... 0.0.0.20
External Routing............................... Import NSSAs
Spf Runs....................................... 0
Area Border Router Count....................... 0
Area LSA Count................................. 0