Dell N1100-ON, Reference Manual

Page: 794 / 2332

Layer 2 Switching Commands
794
• vlan-list—A list of secondary VLAN ids to be mapped to a primary VLAN.
The VLAN list can contain multiple entries separated by commas and
containing no spaces. Each entry can be a single VLAN id or a hyphenated
range of VLANs.
Default Configuration
This command has no default setting.
Command Mode
VLAN Configuration mode
User Guidelines
A community VLAN carries traffic among community ports and from
community ports to the promiscuous ports on the corresponding primary
VLAN.
An isolated VLAN is used by isolated ports to communicate with
promiscuous ports. It does not carry traffic to other community ports or other
isolated ports with the same primary VLAN.
The primary VLAN is the VLAN that carries traffic from a promiscuous port
to the private ports.
VLAN 1 cannot be configured in a private VLAN configuration.
Examples
console# configure terminal
console(config)# vlan 10
console(config-vlan)# private-vlan primary
console(config-vlan)# exit
console(config)# vlan 1001
console(config-vlan)# private-vlan isolated
console(config-vlan)# exit
console(config)# vlan 1002
console(config-vlan)# private-vlan community
console(config-vlan)# exit
console(config)# vlan 1003
console(config-vlan)# private-vlan community
console(config-vlan)# exit
console(config)# vlan 20
console(config-vlan)# private-vlan association 1001-1003
console(config-vlan)# end