Dell N1100-ON, Reference Manual

Page: 199 / 2332

Dell EMC Networking CLI
199
DHCP Client
a. For the meaning of each Mode abbreviation, see Mode Types .
Configuration and Image Files
Command Description Mode
a
boot system Specifies the system image that the switch loads
at startup.
PE
clear config Restores switch to default configuration. PE
copy Copies files from a source to a destination. PE
delete Deletes a file from a flash memory. PE
dir Prints the contents of the flash file system. PE
erase Erases the startup configuration, the backup
configuration, or the backup image.
PE
filedescr Adds a description to a file. PE
rename Renames the file present in flash. PE
show backup-config Displays contents of a backup configuration
file.
PE
show bootvar Displays the active system image file that the
switch loads at startup.
UE
show running-config Displays the contents of the currently running
configuration file.
PE
show startup-config Displays the startup configuration file contents. PE
write Copies the running configuration image to the
startup configuration.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
release dhcp Forces the DHCPv4 client to release a leased
address.
PE
renew dhcp Forces the DHCP client to immediately renew
an IPv4 address lane.
PE