Dell N1100-ON, Reference Manual

Page: 2279 / 2332

Switch Management Commands
2279
User Guidelines
The HTTP TCP port should not be set to a value that might conflict with
other well-known protocol port numbers used on this switch.
Example
The following example shows how the http port number is configured to
10013.
console(config)#ip http port 10013
ip http server
Use the ip http server command to enable the switch to allow HTTP access
to the switch. To disable this function use the no form of this command.
Syntax
ip http server
no ip http server
Default Configuration
The default mode is enabled.
Command Mode
Global Configuration mode
User Guidelines
This command enables HTTP access to the switch. Use the ip http secure-
server command to enable HTTPS access. It is recommended that
administrators enable HTTPS access in preference to HTTP access in order
to ensure that management activity is not snooped.
Example
The following example enables the switch to be configured from a browser.
console(config)#ip http server