Dell N1100-ON, Reference Manual

Page: 1337 / 2332

Layer 3 Routing Commands
1337
Default Configuration
There is no default configuration for this command.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
Configuration sub-modes.
User Guidelines
The following fields are displayed.
Field Description
Admin Mode Whether BGP is globally enabled.
BGP Router ID The configured router ID.
Local AS Number The router’s AS number.
Traps Whether BGP traps are enabled.
Maximum Paths The maximum number of next hops in an external BGP
route.
Maximum Paths iBGP The maximum number of next hops in an internal BGP
route.
Default Keep Alive Time The configured keepalive time used by all peers that
have not been configured with a peer-specific keepalive
time.
Default Hold Time The configured hold time used by all peers that have not
been configured with a peer-specific hold time.
Number of Network Entries The number of distinct IPv6 prefixes in the local RIB.
Number of AS Paths
The number of IPv6 AS paths in the local RIB.
Dynamic Neighbors The number of dynamically discovered neighbors
(current number, maximum number discovered, upper
limit allowed).
Default Metric The default value for the MED for redistributed routes.
Default Route Advertise Whether BGP is configured to advertise a default route.
Corresponds to default-information originate.
Redistributing