Dell N1100-ON, Reference Manual

Page: 2203 / 2332

Switch Management Commands
2203
Example
The show nsf command is used to display which unit is the management unit
and which is the backup unit.
console#show nsf
Administrative Status.......................... Enable
Operational Status............................. Enable
Last Startup Reason............................ Warm Auto-Restart
Time Since Last Restart........................ 0 days 16 hrs 52 mins 55 secs
Restart In Progress............................ No
Warm Restart Ready............................. Yes
Copy of Running Configuration to Backup Unit:
Status...................................... Stale
Time Since Last Copy........................ 0 days 4 hrs 53 mins 22 secs
Time Until Next Copy........................ 28 seconds
Unit NSF Support
---- -----------
1 Yes
2 Yes
3 Yes
show power-usage-history
Use the show power-usage-history command to display the history of unit
power consumption for the unit specified in the command and total stack
power consumption. Historical samples are not saved across switch
reboots/reloads.
Time Since Last
Copy
When the running configuration
was last copied from the
management unit to the backup
unit.
Time Stamp
Time Until Next
Copy
The number of seconds until the
running configuration will be copied
to the backup unit. This line only
appears when the running
configuration on the backup unit is
Stale.
0 - 120 seconds
Parameter Description Range Default