Dell N1100-ON, Reference Manual

Page: 181 / 2332

Dell EMC Networking CLI
181
ip pim Administratively configures PIM mode for IP
multicast routing on a VLAN interface.
IC
ip pim bsr-border Administratively disables bootstrap router
(BSR) messages from being sent or received
through an interface.
IC
ip pim bsr-candidate Configures the router to advertise itself as a
bootstrap router (BSR).
GC
ip pim dense-mode Administratively configures PIM dense mode
for IP multicast routing.
GC
ip pim dr-priority Administratively configures the advertised
designated router (DR) priority value.
IC
ip pim hello-interval Administratively configures the PIM Hello
messages on the specified interface.
IC
ip pim join-prune-interval Administratively configures the frequency of
join/prune messages on the specified interface.
IC
ip pim rp-address Defines the address of a PIM RP for a specific
multicast group range.
GC
ip pim rp-candidate Configures the router to advertise itself to the
bootstrap router (BSR) as a PIM candidate
rendezvous point (RP) for a specific multicast
group range.
IC
ip pim sparse-mode Administratively configures PIM sparse mode
for IP multicast routing.
GC
ip pim ssm Administratively configures PIM Source
Specific Multicast (SSM) range of addresses for
IP multicast routing.
GC
show ip multicast Displays the system-wide multicast
information.
PE
show ip pim boundary Displays the system-wide multicast
information.
PE
show ip multicast interface Displays the multicast information for the
specified interface.
PE
show ip mroute Displays a summary or all the details of the
multicast table.
PE
Command Description Mode
a