Dell N1100-ON, Reference Manual

Page: 1350 / 2332

Layer 3 Routing Commands
1350
Default Configuration
By default, all listen ranges are shown.
Command Mode
Privileged Exec and global configuration mode
User Guidelines
There are no user guidelines.
Command History
Introduced in version 6.3.0.1 firmware.
Example
console(config-router)#show ip bgp listen range
Listen Range .................................. 10.27.0.0/16
Inherited Template ............................ template_10_27
Member ASN State
---------------- ----- -----------
10.27.8.189 65001 OPENCONFIRM
10.27.128.235 0 ACTIVE
Listen Range .................................. 15.15.0.0/24
Inherited Template ............................ template_15_15
Member ASN State
---------------- ----- -----------
show ip bgp neighbors
The show ip bgp neighbors command shows details about BGP neighbor
configuration and status.
Syntax
show ip bgp [ vrf vrf-name] neighbors [neighbor-address]
• neighbor-address—(Optional) The IPv4 address of a neighbor. Used to
limit the output to a single neighbor.