Dell N1100-ON, Reference Manual

Page: 514 / 2332

Layer 2 Switching Commands
514
User Guidelines
This command has no user guidelines.
Example
console(config)#ipv6 mld snooping vlan 2 last-listener-query-interval 7
ipv6 mld snooping vlan mcrtrexpiretime
The ipv6 mld snooping mcrtrexpiretime command sets the Multicast Router
Present Expiration time. The time is set for a particular interface or VLAN.
This is the amount of time in seconds that a switch waits for a query to be
received on an interface before the interface is removed from the list of
interfaces with multicast routers attached. The range is 1 to 3600 seconds.
Syntax
ipv6 mld snooping vlan vlan-id mcrtrexpiretime time
no ipv6 mld snooping vlan vlan-id mcrtrexpiretime
• vlan-id — A VLAN identifier (Range 1-4093).
• time — Multicast router present expiration time in seconds. (Range: 1–
3600)
Default Configuration
The default multicast router present expiration time is 300 seconds.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines
Example
console(config)#ipv6 mld snooping vlan 2 mcrtrexpiretime 1500