Dell N1100-ON, Reference Manual

Page: 232 / 2332

Using the CLI
232
console#
Global Configuration Mode
Global Configuration commands allow the operator to change the
configuration of the switch. The Privileged Exec mode command configure
(or configure terminal ) is used to enter Global Configuration mode.
console(config)#
The following are the Global Configuration submodes:
• SNMP v3 Host Configuration — Configures the parameters for the
SNMP v3 server host.
• SNMP Community Configuration — Configures the parameters for the
SNMP server community.
• MST — The Global Configuration mode command spanning-tree mst
configuration is used to enter into the Multiple Spanning Tree
configuration mode.
• Line Interface — Contains commands to configure the management
connections. These include commands such as line speed and time-out
settings. The Global Configuration mode command line is used to enter
the Line Interface mode.
• Router OSPF Configuration — Global configuration mode command
router ospf is used to enter into the Router OSPF Configuration mode.
• Router RIP Configuration — Global configuration mode command
router rip is used to enter into the Router RIP Configuration mode.
• Router OSPFv3 Configuration — Global configuration mode command
ipv6 router ospf is used to enter into the Router OSPFv3 Configuration
mode.
• Router BGP Configuration — Global configuration mode command
router bgp is used to enter into the Router BGP Configuration mode.
• IPv6 DHCP Pool Mode — Global configuration mode command ipv6
dhcp pool is used to enter into the IPv6 DHCP Pool mode.
• Management Access List — Contains commands to define management
access administration lists. The Global Configuration mode command
management access-list is used to enter the Management Access List
configuration mode.