Dell N1100-ON, Reference Manual

Page: 1252 / 2332

Layer 3 Routing Commands
1252
no ip bgp fast-external-fallover
• permit —Enables fast external fallover on the interface, regardless of the
global configuration of the feature.
• deny —Disables fast external fallover on the interface, regardless of the
global configuration of the feature.
Default Configuration
Fast external fallover is enabled globally by default. There is no default
interface configuration.
Command Mode
Interface (VLAN) Configuration mode
User Guidelines
This command overrides for a specific routing interface the fast external
fallover behavior configured globally. If permit is specified, the feature is
enabled on the interface, regardless of the global configuration. If deny is
specify, the feature is disabled on the interface, regardless of the global
configuration. The command no ip bgp fast-external-fallover clears the
interface settings and indicates that the global settings should be used.
Example
console(config-if-vlan1)#ip bgp fast-external-fallover permit
ip community-list
Use this command to create or configure a BGP community list. To delete a
community list, use the no form of this command.
Syntax
ip community-list standard list-name { permit | deny } [community-number]
[ no-advertise ] [ no-export ] [ no-export-subconfed ] [ no-peer ]
no ip community-list standard list-name
• standard list-name—Identifies a named standard community list. The
name may contain up to 32 characters.
• permit —Indicates that matching routes are permitted.