Dell N1100-ON, Reference Manual

Page: 2126 / 2332

Switch Management Commands
2126
• server-name — The server name has a maximum length of 20
characters. Any printable character may be used in the server name
other than a question mark. Enclose the server name in quotes if an
embedded blank is desired in the server name.
Default Configuration
A default server named “default” exists at URL stor.g3.ph.dell.com. This
server is pre-configured and may not be removed or modified other than to
disable it.
Command Mode
Support Assist Configuration
User Guidelines
The server-name is used as a reference only and is not required to be used as
part of a URL definition.
Up to four additional servers may be configured.
Use the
exit command to exit from Support Assist Server configuration
mode.
Command History
Introduced in version 6.3.0.1 firmware.
Example
console(config)# support-assist
console(conf-support-assist)#server default
console(conf-support-assist-default)#
show eula-consent support-assist
Use the show eula-consent to may be used to review the EULA details
whenever desired. Displaying the EULA details does not modify the current
state of EULA acceptance for that feature.
Syntax
show eula-consent support-assist