Security Commands
916
Default Configuration
The default deadtime interval is 0 minutes.
Command Mode
RADIUS Server Configuration mode
User Guidelines
If only one RADIUS server is configured, it is recommended to use a
deadtime interval of 0.
Example
The following example specifies a deadtime interval of 60 minutes.
console(config)#radius-server host 192.143.120.123
console(config-auth-radius)#deadtime 60
key
Use the
key
command to specify the encryption key which is shared with the
RADIUS server. Use the
no
form of this command to remove the key.
Syntax
key [ 0|7]
key-string
no key
• 0—The key string that follows is the unencrypted shared secret. The
length is 1–128 characters.
• 7—The key string that follows is the encrypted shared secret. The length is
exactly 256 characters.
• key-string — The key string in encrypted or unencrypted form. In
encrypted form, it must be 256 characters in length. In unencrypted form,
it may be up to 128 characters in length.
Default Configuration
There is no key configured by default.
Summary of Contents for N1100-ON
