Dell N1100-ON, Reference Manual

Page: 400 / 2332

Layer 2 Switching Commands
400
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The following table describes the fields shown in the display:
Field Description
InOctets Counted received octets.
InUcastPkts Counted received Unicast packets.
InMcastPkts Counted received Multicast packets.
InBcastPkts Counted received Broadcast packets.
OutOctets Counted transmitted octets.
OutUcastPkts Counted transmitted Unicast packets.
OutMcastPkts Counted transmitted Multicast packets.
OutBcastPkts Counted transmitted Broadcast packets.
Alignment Errors A count of frames received that are not an integral number
of octets in length and do not pass the FCS check.
FCS Errors Counted frames received that are an integral number of
octets in length but do not pass the FCS check.
Single Collision Frames Counted frames that are involved in a single collision, and
are subsequently transmitted successfully.
Multiple Collision
Frames
A count of frames that are involved in a multiple collision,
and are subsequently transmitted successfully
Late Collisions Counted times that a collision is detected later than one
slot time into the transmission of a packet.
Excessive Collisions Counted frames for which transmission fails due to
excessive collisions.
Received packets
dropped > MTU
Count of received frames dropped due to frame length
greater than the configured MTU.
Transmitted oversized
packets
Count of frames transmission > 1518 octets.