Dell N1100-ON, Reference Manual

Page: 309 / 2332

Layer 2 Switching Commands
309
This information is shown if only an interface parameter is given:
This information is shown if the dynamic parameter is given:
This information is shown if the static parameter is given:
This information is shown if the violation parameter is given:
Field Description
Interface Identifier The interface identifier.
Status The port security administrative status
(enabled/disabled).
Max-dynamic The dynamic MAC address limit.
Max-static The static address limit.
Protect Trap issued on violation (enabled/disabled).
Frequency The frequency of trap issuance (in seconds).
Shutdown Shut down (err-disable) interface on violation
(enabled/disabled).
Sticky Mode Sticky mode configuration (enabled/disabled).
Field Description
Dynamically Learned
MAC Address
Dynamically learned MAC addresses.
VLAN ID The VLAN on which the MAC address is learned.
Field Description
Statically Configured
MAC Address
Statically configured MAC addresses.
VLAN ID The VLAN identifier of the MAC address.
Sticky Indicates if the secure MAC address is sticky.