Dell N1100-ON, Reference Manual

Page: 1358 / 2332

Layer 3 Routing Commands
1358
User Guidelines
Note that this output differs slightly from the output in show ip bgp .
Suppressed routes and non-best routes are not advertised; so these status
codes are not relevant here. Advertised routes always have a single next hop,
the BGP NEXT HOP advertised to the peer. Local preference is never sent to
external peers.
If the vrf-name argument is specified, information pertaining to that VRF is
displayed.
The output indicates whether BGP is configured to originate a default route
to this peer ( neighbor default-originate ).
Command History
Introduced in version 6.2.0.1 firmware.
Updated in version 6.3.0.1 firmware.
Example
console#show ip bgp neighbors 10.10.10.10 advertised-routes
Counters Description
BGP table version Each time phase 2 of the BGP decision process runs to
select new BGP routes, this number is incremented.
Status codes p—The route has been updated in Adj-RIB-Out since
the last UPDATE message was sent. Transmission of an
UPDATE message is pending.
Network Destination prefix
Next Hop The BGP NEXT HOP as advertised to the peer.
Local Pref The local preference. Local preference is never
advertised to external peers.
Metric The value of the Multi Exit Discriminator, if the MED
is advertised to the peer.
Path The AS path. The AS path does not include the local AS
number, which is added to the beginning of the AS path
when a route is advertised to an external peer.
Origin The value of the Origin attribute.