Dell N1100-ON, Reference Manual

Page: 744 / 2332

Layer 2 Switching Commands
744
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged Exec and above
User Guidelines
There are no user guidelines for this command.
Example
console(config)#show spanning-tree vlan 2
VLAN 2
Spanning Tree: Enabled Mode: rapid-pvst
RootID Priority 32770
Address 001E.C9DE.D447
Cost 0
Port This switch is the root
Hello Time: 2s Max Age: 20s Forward Delay: 15s
BridgeID Priority 32770 (priority 32768 sys-id-ext 2)
Address 001E.C9DE.D447
Hello Time: 2s Max Age: 20s Forward Delay: 15s
Aging Time 300 sec
Interface Role Sts Cost Prio.Nbr
--------- ---------- ------------- --------- --------
Gi1/0/1 Designated Forwarding 20000 128.1
Gi1/0/2 Designated Forwarding 20000 128.2
spanning-tree
Use the spanning-tree command in Global Configuration mode to enable
spanning-tree functionality. To disable spanning-tree functionality, use the no
form of this command.
Syntax
spanning-tree
no spanning-tree
Default Configuration
Spanning-tree is enabled.