Dell N1100-ON, Reference Manual

Page: 1270 / 2332

Layer 3 Routing Commands
1270
Syntax
neighbor { ip-address | ipv6-address [ interface interface-id]} default-
originate [ route-map map-name]
• interface-id—A routing interface identifier (VLAN interface).
• ip-address—The neighbor’s IPv4 address.
• ipv6-address —The neighbor’s IPv6 address. If the neighbor’s IPv6 address
is a link local address, the local interface must also be specified.
• map-name—(Optional) A route map may be configured to set attributes
on the default route advertised to the neighbor.
Default Configuration
No default is originated by default.
Command Mode
IPv6 Address Family Configuration
User Guidelines
By default, a neighbor-specific default has no MED and the Origin is IGP.
Attributes may be set using an optional route map. A neighbor-specific
default is only advertised if the Adj-RIB-Out does not include a default
learned by other means, either from the default-information originate (BGP
Router Configuration) command or a default learned from a peer. This type of
default origination is not conditioned on the presence of a default route in
the routing table. This form of default origination does not install a default
route in the BGP routing table (it will not appear in the show ip bgp
command), nor does it install a default route in the Adj-RIB-Out for the
update group of peers so configured (it will not appear in the show ip bgp
neighbors advertised-routes command).
Origination of the default route is not subject to a prefix filter configured
with the command distribute-list prefix out (BGP Router Configuration) .
A route map may be configured to set attributes on the default route sent to
the neighbor. If the route map includes a match ip-address term, that term is
ignored. If the route map includes match community or match as-path