Dell N1100-ON, Reference Manual

Page: 1399 / 2332

Layer 3 Routing Commands
1399
Command History
Introduced in version 6.2.0.1 firmware.
Example
In the example below, IPv6 addresses specified by the prefix list apple are
matched through the route map abc.
Router(config)# route-map abc
Router(config-route-map)# match ipv6 address prefix-list apple
show ip as-path-access-list
This command displays the contents of AS path access lists.
Syntax
show ip as-path-access-list [ as-path-list-number ]
• as-path-list-number—(Optional) When an AS path list number is
specified, the output is limited to the single AS path list specified. Integer
from 1 to 500.
Default Configuration
No match criteria are configured by default.
Command Mode
Privileged Exec mode, Global Configuration mode and all sub-modes.
User Guidelines
There are no user guidelines for this command.
Command History
Introduced in version 6.2.0.1 firmware.
Example
console#show ip as-path-access-list
AS path access list 1
deny _100_
deny ^100$