Dell N1100-ON, Reference Manual

Page: 485 / 2332

Layer 2 Switching Commands
485
Example
The following example sets the querier timer expiry time to 100 seconds.
console(config)#ip igmp snooping querier timer expiry 100
ip igmp snooping querier version
This command sets the IGMP version of the query that the snooping switch
is going to send periodically. The no form of this command sets the IGMP
Querier Version to its default value.
Syntax
ip igmp snooping querier version version
no ip igmp snooping querier version
• version — IGMP version. (Range: 1–2)
Default Configuration
The querier version default is 2.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the IGMP version of the querier to 1.
console(config)#ip igmp snooping querier version 1
show ip igmp snooping querier
This command displays IGMP Snooping Querier information. Configured
information is displayed whether or not IGMP Snooping Querier is enabled.
If a querier is active in the network and IGMP snooping querier is enabled,
the querier’s IP address is shown in the Last Querier Address field.