Dell N1100-ON, Reference Manual

Page: 780 / 2332

Layer 2 Switching Commands
780
udld timeout interval
Use the udld timeout interval command in Global Configuration mode to
configure the interval for the receipt of ECHO replies.
Use the
no form of the command to return the value to the default setting.
Syntax
udld timeout interval timeout-interval
no udld timeout interval
• timeout-interval—UDLD timeout interval. Range is 5 to 60 seconds.
Default Configuration
The default timeout interval is 5 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command sets the time interval used to determine if the link has
bidirectional or unidirectional connectivity. If no ECHO replies are received
within three times the message interval, then the link is considered to have
unidirectional connectivity.
Example
This example sets the UDLD timeout interval to 15 seconds.
console(config)#udld timeout interval 15
udld enable (Interface Configuration)
Use the udld enable command in Interface (physical) Configuration mode to
enable UDLD on a specific interface.
Use the
no form of the command to disable UDLD on an interface.
Syntax
udld enable