Dell N1100-ON, Reference Manual

Page: 243 / 2332

Using the CLI
243
Gigabit Ethernet From Global
Configuration
mode, use the
interface
gigabitethernet
command. Or, use
the abbreviation
interface gi .
console (config-if-
Giunit/slot/port#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
10 Gigabit
Ethernet
From Global
Configuration
mode, use the
interface
tengigabitethernet
command. Or, use
the abbreviation
interface te .
console (config-if-
Teunit/slot/port# To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
40 Gigabit
Ethernet
From Global
Configuration
mode, use the
interface
fortygigabitetherne
t command. Or, use
the abbreviation
interface fo .
console (config-if-
Founit/slot/port#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
Port Channel From Global
Configuration
mode, use the
interface port-
channel command.
Or, use the
abbreviation
interface po .
console (config-if-poport-
channel-number)# To exit to Global
Configuration
mode, use the
exit command,
or
<Ctrl>+<Z>
to Privileged
Exec mode.
Table 2-5. Navigating CLI Command Modes (continued)
Command Mode Access Method Command Prompt Exit or Access
Previous Mode