Layer 3 Routing Commands
1438
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example resets the host interface status parameters of the
IGMP Proxy router.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp proxy-service reset-status
ip igmp proxy-service unsolicit-rprt-interval
Use the
ip igmp proxy-service unsolicit-rprt-interval
command in Interface
Configuration mode to set the unsolicited report interval for the IGMP Proxy
router. This command is valid only if IGMP Proxy on the interface is enabled.
Syntax
ip igmp proxy-service unsolicit-rprt-interval
seconds
• seconds — Unsolicited report interval. (Range: 1-260 seconds)
Default Configuration
The default configuration is 1 second.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example sets 10 seconds as the unsolicited report interval for
the IGMP Proxy router.
console(config)#interface vlan 15
Summary of Contents for N1100-ON
