Dell N1100-ON, Reference Manual

Page: 2008 / 2332

Switch Management Commands
2008
Default Configuration
The buckets configuration is 50. The interval configuration is 1800 seconds.
Command Mode
Interface Configuration (gigabitethernet, port-channel, tengigabitethernet,
fortygigabitethernet) mode.
User Guidelines
This command cannot be executed on multiple ports using the interface
range command.
Example
The following example enables a Remote Monitoring (RMON) MIB history
statistics group on port 1/0/8 with the index number “1” and a polling interval
period of 2400 seconds.
console(config)#interface gigabitethernet 1/0/8
console(config-if-Gi1/0/8)#rmon collection history 1 interval 2400
rmon event
Use the rmon event command in Global Configuration mode to configure an
event. To remove an event, use the no form of this command. See also the
show rmon events command.
Syntax
rmon event number [ log ] [ trap community] [ description string] [ owner
string]
no rmon event number
• number —The event index. (Range: 1–65535)
• log —An entry is made in the log table for each event.
• trap —An SNMP trap is sent to one or more management stations.
• community —If an SNMP trap is to be sent, it is sent to the SNMP
community specified by this octet string. (Range: 0-127 characters)
• description —A comment describing this event. (Range 0-127
characters)