Security Commands
1023
dos-control firstfrag
Use the
dos-control firstfrag
command in Global Configuration mode to
enable Minimum TCP Header Size Denial of Service protection. If the mode
is enabled, Denial of Service prevention is active for this type of attack. If
packets ingress having a TCP Header Size smaller than the configured value,
the packets are dropped.
Syntax
dos-control firstfrag
[size]
no dos-control firstfrag
• size —TCP header size. (Range: 0-255). The default TCP header size is 20.
ICMP packet size is 512.
Default Configuration
Denial of Service is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a minimum TCP header size of 20. Packets
entering with a smaller header size are dropped.
console(config)#dos-control firstfrag 20
dos-control icmp
Use the
dos-control icmp
command in Global Configuration mode to enable
Maximum ICMP Packet Size Denial of Service protections. If the mode is
enabled, Denial of Service prevention is active for this type of attack. If ICMP
Echo Request (PING) packets ingress having a size greater than the
configured value, the packets are dropped.
Summary of Contents for N1100-ON
