Dell N1100-ON, Reference Manual

Page: 1210 / 2332

Layer 3 Routing Commands
1210
Command History
Introduced in version 6.2.0.1 firmware.
Example
console# show bfd neighbors
Local Address Neighbor Uptime State Interface
------------- -------------- ----------- ------ ---------
172.16.10.1 172.16.10.20 02:18:49 Up VLAN10
10.1.10.1 10.1.10.20 01:15:25 Up Gi1/0/5
fdf8:f53b::53 fdf8:f53b::58 00:38:11 Up Gi1/0/1
console# show bfd neighbors details
Registered Protocol The protocol from which the BFD session was initiated and
that is registered to receive events from BFD. (for example,
BGP).
Local Diag The diagnostic state specifying the reason for the most
recent change in the local session state.
Demand mode Indicates if the system wishes to use Demand mode.
Note: Demand mode is not supported in Dell 6.0 8.0,
Minimum transmit
interval
The minimum interval to use when transmitting BFD
control packets.
Actual TX Interval The transmitting interval being used for control packets.
Actual TX Echo interval The transmitting interval being used for echo packets.
Minimum receive
interval
The minimum interval at which the system can receive
BFD control packets.
Detection interval
multiplier
The number of BFD control packets that must be missed in
a row to declare a session down.
My discriminator Unique Session Identifier for Local BFD Session.
Your discriminator Unique Session Identifier for Remote BFD Session.
Tx Count The number of transmitted BFD packets.
Rx Count The number of received BFD packets.
Drop Count The number of dropped packets.
Parameters Description