Dell N1100-ON, Reference Manual

Page: 2125 / 2332

Switch Management Commands
2125
• ipv6-address — The IPv6 address of the proxy server in IPv6 notation.
• port-number — The TCP port number of the proxy server. Range 1-
65535. Default 443.
• userid— The user name used to log into the proxy server.
• encryption-type— 0 indicates an unencrypted password. 7 indicates an
encrypted password.
• password— An unencrypted or encrypted password. Maximum length is
64 characters for an unencrypted password. Encrypted passwords must
be 128 characters in length.
Default Configuration
By default, no proxy is configured.
By default, passwords are entered as unencrypted and are always displayed
and stored encrypted
Command Mode
Support Assist Configuration
User Guidelines
Passwords are always stored and displayed as encrypted, even if entered in
unencrypted format.
Command History
Introduced in version 6.3.0.1 firmware.
server
Use the server command to configure a SupportAssist server and enter
SupportAssist server configuration mode. Use the no form of the command
to remove a SupportAssist server.
server server-name
no server server-name