/MONI
R / W
NONE,
RELAY, IN_A,
OUT_A,
IN_B, OUT_B
List of active elements for Audio
Monitoring. Input and output channels
can be monitored. RELAY switches
active channels onto the monitor bus.
Commands for DSP Parameters
/PRM
/IN_A
/IDX00
R / W
Read and write of input channel A DSP
parameter values via index numbers. For
further details please refer to DSP
Parameter Index Table
...
/IDX2B
R / W
/IN_B
...
Same as above for input channel B
/OUT_A
/IDX00
R / W
Read and write of output channel A DSP
parameter values via index numbers. For
further details please refer to DSP
Parameter Index Table
...
/IDX41
R / W
/OUT_B
Save as above for output channel B
/DLYTEMP
R / W
-20.0...+60.0
[°C]
Ambient temperature for the calculation
of delays with distance values.
Commands for Presets
/PRESET /LOAD
R / W
U1...U6,
O1...O2,
F1...F2
Load User Presets U1...U6, Owner
Presets O1...O2 or Factory Presets
F1...F2. Readout of preset data loaded
last. The string "(edited)" behind the
preset number indicates that values
have already been edited.
/SAVE
W
U1...U6,
O1...O2
Save User Preset or Owner Preset
/TITLE
R / W
up to 16
characters
Preset Name
/INITIAL
R / W
U1...U6,
O1...O2,
F1...F2, A
Selection of user/owner/factory/actual
preset to be loaded after reset
/PRSGATE
R / W
ON, OFF
State of identical named error/statusflag
which pre- vents from dangerous
changes of output configuration.
/OWNER
/
PASSW
ORD
R / W
OK, FALSE,
"password"
Write "password" to identify owner until
next reset. Saving owner presets and
password definition can only be done if
this state is 'OK'. Read value (OK,
FALSE) if the owner is identified
successfully.
IRIS-Net
REMOTE AMPLIFIER | en 222
Bosch Security Systems B.V.
User Manual
2017.05 | 3.20 | F.01U.119.956
