manualshive.com logo in svg

Bosch IRIS-Net, User Manual

Introducing Bosch IRIS-Net, a cutting-edge audio management system. Unlock its full potential with our comprehensive User Manual, available for free download at manualshive.com. This manual equips you with step-by-step instructions, enabling you to optimize your audio experience effortlessly. Embrace excellence in sound engineering today.

Share
Download
background image

Channel Selection

If the Up/Down buttons of a PWS-4 shall serve to set different parameters, switching between parameters is 
accomplished using the BUTTON TYPE Channel Selection.
The following example for the usage of the BUTTON TYPE Channel Selection shows how to configure the buttons of a 
PWS-4 so that the Up/Down buttons can be used to individually control the volume setting for announcements and 
background music. Therefore, it is assumed that the IRIS-Net project includes a NetMax N8000 with a 2x1 monaural 
mixer. Announcements shall be fed to input 1 and the background music to input 2. The two upper buttons of the PWS- 
4 are to be used to select the desired signal (i.e. the corresponding mixer input) and the Up/Down buttons can be used 
to control the volume setting of the selected input channel.
1.

Select “Configuration” from the contextual menu of the PWS Device in the IRIS-Net worksheet. The Configuration 
dialog appears.

2.

Add a front unit of the type PWS-4 to the left-hand frame of the three-frame window of the Configuration Dialog. 
Either use the “drag and drop” method to drag the PWS-4 out of the category Front Units of the PWS objects 
library or select the entry “Add PWS-4” from the left-hand frame’s contextual menu in the window.

3.

Select the first Control on the top of the added PWS-4 using the left mouse button. As an alternative, select the 
Control by choosing the entry “Button 1” from the SELECT PWS CONTROL dropdown menu.

4.

Use the BUTTON TYPE dropdown menu to assign the button type “Channel Selection” to the selected Control. The 
same button type is assigned to the second Control automatically.

5.

Name the button by entering “Durchsage” into the LABEL input field.

6.

Select the last Control of the PWS-4 using the left mouse button. As an alternative, select the Control by choosing 
the entry "Button 5" from the SELECT PWS CONTROL dropdown menu.

7.

Use the BUTTON TYPE dropdown menu to assign the button type "UpDown Meter" to the selected Control.

8.

Click on button MODIFY FUNCTIONS / CONNECTIONS and select function "Level" and connection 
"N8000_1.DSP.Mixer_1.ChIn1".

9.

Select the second Control on the top of the added PWS-4 using the left mouse button. As an alternative, select the 
Control by choosing the entry “Button 2” from the SELECT PWS CONTROL dropdown menu.

10. Name the button by entering “Musik” into the LABEL input field.
11. Select the last Control of the PWS-4 using the left mouse button. As an alternative, select the Control by choosing 

the entry "Button 5" from the SELECT PWS CONTROL dropdown menu.

12. Use the BUTTON TYPE dropdown menu to assign the button type "UpDown Meter" to the selected Control.
13. Click on button MODIFY FUNCTIONS / CONNECTIONS and select function "Level" and connection 

"N8000_1.DSP.Mixer_1.ChIn2". The following illustration shows the Configuration Dialog after configuration of the 
button is finished.

IRIS-Net

PWS PROGRAMMABLE WALL STATION | en 715

Bosch Security Systems B.V.

User Manual

2017.05 | 3.20 | F.01U.119.956

Summary of Contents for IRIS-Net



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IRIS-Net

La Crosse LTV-WL1 Manual preview
LTV-WL1
Brand: La Crosse Pages: 3
CP Electronics EBMPIR-MB-B Product Manual preview
EBMPIR-MB-B
Brand: CP Electronics Pages: 4
MRC Synchro Sound2 Quick Start Manual preview
Synchro Sound2
Brand: MRC Pages: 2
Gemini 931R12 Installation And Use Manual preview
931R12
Brand: Gemini Pages: 10
3M Aqua-Pure 3MFF100 Installation And Operating Instructions Manual preview
Aqua-Pure 3MFF100
Brand: 3M Pages: 8
Optiview Mini Speed Dome Camera Instruction Manual preview
Mini Speed Dome Camera
Brand: Optiview Pages: 31
GCE SAFE-GUARD-5 Instructions For Use Manual preview
SAFE-GUARD-5
Brand: GCE Pages: 28
EarthMinded RainStation RS-0001 User Manual preview
RainStation RS-0001
Brand: EarthMinded Pages: 16
hager TCC521E User Instructions preview
TCC521E
Brand: hager Pages: 4
Dahua Technology IPC-PDB4830-B360 Quick Start Manual preview
IPC-PDB4830-B360
Brand: Dahua Technology Pages: 21
Abus FUEM35000A Quick Manual preview
FUEM35000A
Brand: Abus Pages: 4
jablotron JA-162A-US Quick Start Manual preview
JA-162A-US
Brand: jablotron Pages: 2
ELRO Pro Alarm System AP5500 Quick Start Manual preview
Pro Alarm System AP5500
Brand: ELRO Pages: 8
ADT Home Assist Quick Start Manual preview
Home Assist
Brand: ADT Pages: 14
RAM CSS300 User Manual preview
CSS300
Brand: RAM Pages: 38
Kompernass 75101 Operating Instructions Manual preview
75101
Brand: Kompernass Pages: 40
Ronix RWS-XE5DIP3610M-IR Operating Instruction preview
RWS-XE5DIP3610M-IR
Brand: Ronix Pages: 28
hager TCC520E Setting Instructions preview
TCC520E
Brand: hager Pages: 2

Brands by name

Popular brands

Load more brands