Bosch IRIS-Net User Manual Download Page 934

Page: 934 / 994

The Announcement OFF block is used to stop an announcement. Double click the block to edit the
announcement settings (see screenshot below).
–

PRIORITY: Priority of the announcement (0 to 100).

–

STOP PRIORITY: Enter the priority (0 to 100) that is used to stop an announcement.

–

INPUT CHANNEL: Select the input channel of the device, where the announcement signal is
present.

–

DESTINATIONS: Select the destination zone(s) or group(s), where the announcement should
be stopped.

The Chime block is used to trigger a chime. Double click the block to edit the chime settings.
–

PRIORITY: The priority of the chime (0 to 100).

–

TYPE: Select the type of the chime.

–

LOOP: Select this checkbox to repeat the chime automatically.

–

HOLD: Hold means that the message is stopped at the loop end.

–

DESTINATIONS: Select the destination zone(s) or group(s) for the chime.

IRIS-Net

PAVIRO | en 934

Bosch Security Systems B.V.

User Manual

2017.05 | 3.20 | F.01U.119.956

Summary of Contents for IRIS-Net



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IRIS-Net

Reviews:

Related manuals for IRIS-Net

Brands by name

Popular brands

Bosch IRIS-Net, User Manual

Search results

Summary of Contents for IRIS-Net

Reviews:

Related manuals for IRIS-Net

Brands by name

Popular brands