First, you have to select the desired RACE file by use of the Browse... button. Because a RACE file can hold the data of
up to 31 EV Dx38, you need to continue by selecting the desired device from the RACE file within the dialog SELECT
DEVICE FROM RACE FILE. At the end you have to specify which of the four Dx38 output channels should be assigned to
the corresponding amplifier channels. Clicking onto OK button completes the process.
!
Caution!
The loaded RACE file becomes instantly audible when in on-line mode. Be sure to select the
desired file with the correct set of parameters. In the worst case, this could lead to severe
damage to the connected loudspeaker cabinets due to improper signal processing!
Consequences
MASTER EQ
Both input channels of a remote amplifier employ 5-band parametric equalizers each, which allow programming highly
variable full-range speaker equalization to match a PA-system to different environmental and acoustical requirements.
In many cases post-mixing console parametric equalization becomes redundant.
The Master-EQ is selected by clicking on the second block of the flow diagram selector or by double clicking on the
MASTER EQ block in the full-scale flow diagram.
IRIS-Net
REMOTE AMPLIFIER | en 124
Bosch Security Systems B.V.
User Manual
2017.05 | 3.20 | F.01U.119.956
