X-Over Block:
This block represents the crossover within the corresponding output channel. The graph shows the
frequency response that results from the set X- Over parameters. Three additional LEDs indicate the
status of gain trim, polarity and delay. A single click with the left mouse button onto this block opens
the X-OVER page. Clicking with the right mouse button opens the Copy & Paste menu, which allows
copying all parameters of the corres- ponding X-Over block to any other X-Over block within the same
project.
Level Block:
The numerical field is identical to the numerical field below the level controls in the Userpanel. The
MUTE button is for attenuating the output level of the corresponding output to –∞. Clicking the MUTE
button with the left mouse button mutes the corresponding output. The MUTE button is vir- tually
pressed and lights red. Clicking the MUTE button once again with the left mouse button disables the
mute-function and the amplifier output is again active. The MUTE button is virtually disengaged and
not lit.
Dynamics Block:
This block provides graphical display of the dynamics functions of the corresponding output. The two
LEDs indicate whether compressor or limiter have been activated. The graph provides indication of the
set values. A single click with the left mouse button onto this block opens the DYNAMICS page.
Clicking with the right mouse button opens the Copy & Paste menu, which allows copying all
parameters of the corresponding Dynamics block to any other Dynamics block within the same
project.
Output Block:
The text field allows specifying a name for the corresponding output channel. A click with the right
mouse button onto OUT 1 to OUT 4 opens the Copy & Paste menu, which allows copying all
parameters of the corresponding output channel (Routing, Channel EQ, X-Over, Dynamics) to any
other output channel within the same project. However, it is important to bear in mind that the DSP
data only is being copied. Impedance or speaker data is not copied.
Status Indication
Element
Description
Shows the number of the actually audible preset. However, this is only true if the EDITED
LED lights green, i.e. no DSP parameter has been changed since the last RECALL.
Indicates the name of the actually audible preset.
The EDITED indicator provides information whether a parameter has been altered since
the last RECALL. If the indicator lights red, parameters have been edited and therefore
differ from the ones of the preset that is shown.
IRIS-Net
DIGITAL SOUND PROCESSOR | en 556
Bosch Security Systems B.V.
User Manual
2017.05 | 3.20 | F.01U.119.956
