The receiver can be assigned a group. Click on the gray-shaded entry field below the GP label and
enter the desired group. Press Return on the keyboard to acknowledge the entered group. The
group value can only be in the range 1-21.
The REV system guitar optimization mode requires both the transmitter and receiver be placed
into guitar mode. Clicking on the micro- phone bitmap puts the device in guitar mode and bitmap
changes to a guitar. Clicking on the guitar bitmap puts the device in voice mode and bitmap
changes to a microphone.
The receiver can be assigned a channel. Click on the gray-shaded entry field below the CH label
and enter the desired channel. Press Return on the keyboard to acknowledge the entered
channel. The channel value can only be in the range 1-16.
The FREQ indicator displays the current operating frequency of the receiver. The change to the
frequency value is accepted only when online and only for a user group. The frequency should be
within the operating frequency range. Press Return on the keyboard to acknowledge the entered
frequency
A name can be assigned to each microphone to specify its use or position. Click on the gray-
shaded entry field below the MIC NAME label and enter the desired name. Press Return on the
keyboard to acknowledge the entered name.
HINT: Name shall be alphanumeric and no special character except space is allowed. Name
shall be utmost 8 characters in length.
The antenna diversity indicator signals the current diversity status. The green indication on the
left antenna indicates that the signal is fed through the left antenna. The green indication on the
right antenna indicates that the signal is fed through the right antenna.
The multicolor battery level indicator shows the current battery status of the body-pack or the
microphone. The indication is active only when the group and channel and the operating
frequency on the REV receiver and microphone are same. The threshold battery level below
which the status is indicated in red depends on the low battery alarm level property configurable
on the REV Configuration dialog. A green indicates the battery is full.
The AU display shows the current level of audio input to the receiver. The value in the range 0-10
is indicated in green, 11-50 is indicated in yellow and 51-100 is indicated in red
The RF display shows the current strength of the RF signal input to the receiver. The value in the
range 0-10 is indicated in red, 11-50 is indicated in yellow and 51-100 is indicated in green.
Error status led is a priority based indicator that displays error status in battery level (High
priority), audio level (Medium priority) or RF signal strength (low priority). The led flashes in red
for a battery error, orange for an audio level error, amber for RF signal strength error based on
the precedence of their priority levels. The led is hollow if there are no errors.
The edition of REV properties can be locked or unlocked. Pressing on the lock bitmap on the
panel locks the edition. Pressing on lock again unlocks it.
HINT: Locking or unlocking can be done only when no operation is performed currently on the
receiver.
IRIS-Net
REV WIRELESS MICROPHONE SYSTEM | en 309
Bosch Security Systems B.V.
User Manual
2017.05 | 3.20 | F.01U.119.956
