Dynamics Block:
This block provides graphical display of the dynamics functions of the
corresponding output. The two LEDs indicate whether compressor or limiter
have been activated. The graph provides indication of the set values.
Clicking with the right mouse button opens the Copy & Paste menu, which
allows copying all parameters of the corresponding Dynamics block to any
other Dynamics block within the same project.
Output Block:
The text field allows specifying a name for the corresponding output
channel.
A click with the right mouse button onto OUT A or OUT B opens the Copy &
Paste menu, which allows copying all parameters of the corresponding
output channel (Routing, Channel EQ, X-Over, Dynamics) to any other output
channel within the same project. However, it is important to bear in mind
that the DSP data only is being copied. Impedance or speaker data is not
copied.
Status Indication
Element
Description
The MEMORY display shows the number according to the actually audible preset.
However, this is only true if the EDITED LED lights green, i.e. no DSP parameter has
been changed since the last RECALL.
NAME indicates the name of the actually audible preset.
The EDITED indicator provides information whether a parameter has been altered
since the last RECALL. If the indicator lights red, parameters have been edited and
therefore differ from the ones of the preset that is shown.
Store / Recall / Preview
Element
Description
Lets you select a preset number. The selection is valid for all following actions, e.g. RECALL,
PREVIEW or STORE.
This field allows assigning a name to a preset before saving it. The name is stored as well and
is displayed in the status line NAME after performing a RECALL.
STORE saves all momentary set DSP parameters together with the entered name into the
specified preset.
IRIS-Net
REMOTE AMPLIFIER | en 122
Bosch Security Systems B.V.
User Manual
2017.05 | 3.20 | F.01U.119.956
